Floor Standing Lifting StationsSanicubic 2 Classic L
Ambient visual of the Sanicubic 2 Classic, lifting station for grey/waste water installed on the floor in a garage.

Sanicubic 2 Classic L

The Sanicubic 2 Classic contains two separate, load balanced pumps with high performance macerating systems and will operate alternately. In the event of inflow overload, both motors run at the same time, or in the unlikely event that one motor fails, the other one will take over.
Takes waste from WC’s, basin, bath, shower, bidet, washing machine, dishwasher and sink.
Tough, reliable macerator ideal for busy business environments and larger domestic situations
New design with easily removable motor for servicing and maintenance
Pumps up to 11m vertically or 110m horizontally
Find out more

Product details

The Sanicubic 2 Classic is a tough, reliable macerator pump which contains two separate load balanced macerator systems which operate alternately ensuring even wear of motors. It is ideal for busy business and large domestic situations. The unit can handle waste water from WC’s, a basin, sink, washing machine, dishwasher, shower, bath, and bidet. The Sanicubic 2’s new design means the motors are easily removable for servicing and maintenance as is the water level indicator. It has two alarms for ultimate safety both are hard-wired alarms. The Sanicubic 2 Classic has four inlets, the centre height of the inlets is 140mm and it discharges through 50 mm pipework. It has a working temperature of 35ºC, however it will handle temperatures up to 75ºC for short periods. The Sanicubic 2 has a tank capacity of 45 litres and a flow rate 13m³/h. It can be connected to a Building Management System. The Sanicubic 2 Classic comes with a 2 year warranty.Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanicubic 2 offers you peace of mind and with the back up from our service team there’s never been a better time to install a SFA.
Technical specification

Sanicubic 2 Classic L

Materials

  • Shaft
  • Tank
  • Pump housing
  • Seal
  • Motor housing
  • Impeller
  • Shaft
  • Shaft
  • Tank
  • Tank
  • Pump housing
  • Pump housing
  • Seal
  • Seal
  • Motor housing
  • Motor housing
  • Impeller
  • Impeller
  • Shaft
  • 1.4021
  • Tank
  • PP
  • Pump housing
  • PP 12 GF
  • Seal
  • NBR
  • Motor housing
  • PA 12 GF
  • Impeller
  • PP GF

Electrical features

  • Number of motor(s)
  • Socket included
  • Voltage (V)
  • Frequency (Hz)
  • Power consumption P1 (W)
  • Power output P2 (W)
  • Revolution per minute (RPM)
  • Maximum current (A)
  • IP rating
  • Electrical class
  • Motor insulation class
  • Current
  • Length of cable-control box (m)
  • Number of pumps
  • Type of control box
  • Length (m)
  • Section (mm²)
  • Type of cable
  • Number of motor(s)
  • Number of motor(s)
  • Socket included
  • Socket included
  • Voltage (V)
  • Voltage (V)
  • Frequency (Hz)
  • Frequency (Hz)
  • Power consumption P1 (W)
  • Power consumption P1 (W)
  • Power output P2 (W)
  • Power output P2 (W)
  • Revolution per minute (RPM)
  • Revolution per minute (RPM)
  • Maximum current (A)
  • Maximum current (A)
  • IP rating
  • IP rating
  • Electrical class
  • Electrical class
  • Motor insulation class
  • Motor insulation class
  • Current
  • Current
  • Length of cable-control box (m)
  • Length of cable-control box (m)
  • Number of pumps
  • Number of pumps
  • Type of control box
  • Type of control box
  • Length (m)
  • Length (m)
  • Section (mm²)
  • Section (mm²)
  • Type of cable
  • Type of cable
  • Number of motor(s)
  • Dual motor
  • Socket included
  • No
  • Voltage (V)
  • 220-240
  • Frequency (Hz)
  • 50-60
  • Power consumption P1 (W)
  • 1500
  • Power output P2 (W)
  • 1050
  • Revolution per minute (RPM)
  • 2800
  • Maximum current (A)
  • 13
  • IP rating
  • IP68
  • Electrical class
  • I
  • Motor insulation class
  • F
  • Current
  • Single-phase
  • Length of cable-control box (m)
  • 4
  • Number of pumps
  • 2
  • Type of control box
  • Classic
  • Length (m)
  • 2,5
  • Section (mm²)
  • 1.5
  • Type of cable
  • H07 RN-F 3G

Hydraulic

  • Max. Head. (m)
  • Max. flow rate. (m³/h)
  • Number of inlets
  • External inlet diameter (mm)
  • Discharge diameter ext. (mm)
  • Ext. ventilation diameter (mm)
  • Total volume (L)
  • Useable volume (L)
  • ON Level (mm)
  • OFF level (mm)
  • Alarm level (mm)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Type of impeller
  • Type of activation
  • Max. Head. (m)
  • Max. Head. (m)
  • Max. flow rate. (m³/h)
  • Max. flow rate. (m³/h)
  • Number of inlets
  • Number of inlets
  • External inlet diameter (mm)
  • External inlet diameter (mm)
  • Discharge diameter ext. (mm)
  • Discharge diameter ext. (mm)
  • Ext. ventilation diameter (mm)
  • Ext. ventilation diameter (mm)
  • Total volume (L)
  • Total volume (L)
  • Useable volume (L)
  • Useable volume (L)
  • ON Level (mm)
  • ON Level (mm)
  • OFF level (mm)
  • OFF level (mm)
  • Alarm level (mm)
  • Alarm level (mm)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Type of impeller
  • Type of impeller
  • Type of activation
  • Type of activation
  • Max. Head. (m)
  • 13
  • Max. flow rate. (m³/h)
  • 15
  • Number of inlets
  • 5
  • External inlet diameter (mm)
  • 40, 50, 100, 110
  • Discharge diameter ext. (mm)
  • 50
  • Ext. ventilation diameter (mm)
  • 50
  • Total volume (L)
  • 45
  • Useable volume (L)
  • 17,5
  • ON Level (mm)
  • 140
  • OFF level (mm)
  • 70
  • Alarm level (mm)
  • 210
  • Max. temperature of the pumped liquid (5 min) (° C)
  • 70 °C
  • Type of impeller
  • Shredding wheel Pro X K2
  • Type of activation
  • Pneumatic

Logistics

  • Gross weight (kg)
  • Gross weight (kg)
  • Gross weight (kg)
  • Gross weight (kg)
  • 34

General description

  • EAN code
  • EAN code
  • EAN code
  • EAN code
  • 3308815102764
Products

Related products

Remote wired alarm for lifting station to install Sanicom 2

Sanicom 2 / Sanicubic 2L wired alarm unit

g8q57u0qxinfjhttlwnmpbo6c3kpq5ru.png

DN 50 inlet gate valve

FAQs

Frequently Asked Questions

  • It lifts grey and black water from commercial premises, including wastewater collected in basements or at distant points.

  • It is equipped with the ProX K2 macerating system to reduce clogging risk.

  • The total tank volume is 45 L, the useful volume is 17.5 L, and the maximum pumped-liquid temperature is 70°C for five minutes.

  • It has two pumps and five inlets, allowing multiple sanitary connections.

  • The published maximum head is 13 m and the maximum flow is 15 m³/h.

  • It is supplied with a classic control box, pneumatic activation and IP68 protection, together with audible and visual alarm functions.

  • It lifts grey and black water from commercial premises, including wastewater collected in basements or at distant points.

  • It has two pumps and five inlets, allowing multiple sanitary connections.

  • It is equipped with the ProX K2 macerating system to reduce clogging risk.

  • The published maximum head is 13 m and the maximum flow is 15 m³/h.

  • The total tank volume is 45 L, the useful volume is 17.5 L, and the maximum pumped-liquid temperature is 70°C for five minutes.

  • It is supplied with a classic control box, pneumatic activation and IP68 protection, together with audible and visual alarm functions.

Quality

Buy with confidence

  • Made in France

    Many products have received the Made in France label.

  • Performance and Reliability

    Technologies and materials that ensure efficiency and longevity.

  • Warranty

    Up to 2 years warranty.

  • Extensive support

    A network of repair technicians.

  • Experts Since 1958

    Creator of the Sanibroyeur macerating toilet.