Sanigrease S PM
Sanigrease S 2/4/7/10/15 PM grease separators are designed for indoor wastewater treatment. They are modular thanks to a PE tank with a width of 700 mm and inlet/outlet connections on both sides. They include a pump and a 3-way switching valve allowing the mixing of water, grease and deposits, their discharge and water filling.
Tank width of 700 mm for easy door passage
Rotomoulded polyethylene tank with sludge trap
Modification of inlet and outlet direction on request
Sloped bottom for complete discharge
Inspection window with wiper
Vortex pump for mixing and evacuation
Rotomoulded polyethylene tank with sludge trap
Modification of inlet and outlet direction on request
Sloped bottom for complete discharge
Inspection window with wiper
Vortex pump for mixing and evacuation
Find out more
Product details
The Sanigrease S 2/4/7/10/15 PM are grease separators designed for indoor installation. Available in 5 nominal sizes, these grease separators are made of rotomoulded polyethylene. They are lightweight, rigid and durable. Their installation is modular thanks to the small width of 700 mm and the possibility to connect inlets and outlets on the right or left side of the tank. They are equipped with a desilter for collecting heavier waste. The inclined bottom of the tank enables complete discharge. They are fitted with 2 watertight covers that prevent unpleasant odours from escaping.
The PM versions are equipped with a porthole and windscreen wiper for external level control, a manual filling unit, a 3-way switching valve and a pump.
In position 1, the valve starts mixing water, grease and deposits from the bottom to the top of the separator. The pump, equipped with a vortex impeller, reduces large particles.
In position 2, the pump discharges the mixture to the external tank via the drain column.
Finally, by opening the manual ball valve, the separator is filled with water.
The PM versions are equipped with a porthole and windscreen wiper for external level control, a manual filling unit, a 3-way switching valve and a pump.
In position 1, the valve starts mixing water, grease and deposits from the bottom to the top of the separator. The pump, equipped with a vortex impeller, reduces large particles.
In position 2, the pump discharges the mixture to the external tank via the drain column.
Finally, by opening the manual ball valve, the separator is filled with water.
Technical specification
Sanigrease S PM
Technical data
Materials
Hydraulic
General description
Quality
Buy with confidence
Made in France
Many products have received the Made in France label.
Performance and Reliability
Technologies and materials that ensure efficiency and longevity.
Warranty
Up to 2 years warranty.
Extensive support
A network of repair technicians.
Experts Since 1958
Creator of the Sanibroyeur macerating toilet.