Sanipump VX 50
The Sanipump VX 50 is a cast iron submersible pump which can remove black water and rainwater up to a maximum height of 16 m and has a discharge diameter of DN 50.
Vortex impeller
DN 50 outlet
12 versions, single and three-phase
S1 mode (if motor fully submersed)
Available in transportable or stationary version
DN 50 outlet
12 versions, single and three-phase
S1 mode (if motor fully submersed)
Available in transportable or stationary version
Technical specification
Sanipump VX 50
- Version
- Version
- Version
- Version
- Sanipump VX 50.1 S
- Version
- Sanipump VX 50.1 SA
- Version
- Sanipump VX 50.1 T
- Version
- Sanipump VX 50.2 S
- Version
- Sanipump VX 50.2 SA
- Version
- Sanipump VX 50.2 T
- Version
- Sanipump VX 50.3 S
- Version
- Sanipump VX 50.3 SA
- Version
- Sanipump VX 50.3 T
- Version
- Sanipump VX 50.4 S
- Version
- Sanipump VX 50.4 SA
- Version
- Sanipump VX 50.4 T
Materials
- Shaft
- Sealing on motor side
- Fluid sealing
- Pump housing
- Motor housing
- Impeller
- Shaft
- Shaft
- Sealing on motor side
- Sealing on motor side
- Fluid sealing
- Fluid sealing
- Pump housing
- Pump housing
- Motor housing
- Motor housing
- Impeller
- Impeller
- Shaft
- Stainless steel
- Sealing on motor side
- Shaft seal ring
- Fluid sealing
- SIC/Al203
- Pump housing
- EN-GJL-250
- Motor housing
- EN-GJL-250
- Impeller
- EN-GJL-250
- Shaft
- Stainless steel
- Sealing on motor side
- Shaft seal ring
- Fluid sealing
- SIC/Al203
- Pump housing
- EN-GJL-250
- Motor housing
- EN-GJL-250
- Impeller
- EN-GJL-250
- Shaft
- Stainless steel
- Sealing on motor side
- Shaft seal ring
- Fluid sealing
- SIC/Al203
- Pump housing
- EN-GJL-250
- Motor housing
- EN-GJL-250
- Impeller
- EN-GJL-250
- Shaft
- Stainless steel
- Sealing on motor side
- Shaft seal ring
- Fluid sealing
- SIC/Al203
- Pump housing
- EN-GJL-250
- Motor housing
- EN-GJL-250
- Impeller
- EN-GJL-250
- Shaft
- Stainless steel
- Sealing on motor side
- Shaft seal ring
- Fluid sealing
- SIC/Al203
- Pump housing
- EN-GJL-250
- Motor housing
- EN-GJL-250
- Impeller
- EN-GJL-250
- Shaft
- Stainless steel
- Sealing on motor side
- Shaft seal ring
- Fluid sealing
- SIC/Al203
- Pump housing
- EN-GJL-250
- Motor housing
- EN-GJL-250
- Impeller
- EN-GJL-250
- Shaft
- Stainless steel
- Sealing on motor side
- Shaft seal ring
- Fluid sealing
- SIC/Al203
- Pump housing
- EN-GJL-250
- Motor housing
- EN-GJL-250
- Impeller
- EN-GJL-250
- Shaft
- Stainless steel
- Sealing on motor side
- Shaft seal ring
- Fluid sealing
- SIC/Al203
- Pump housing
- EN-GJL-250
- Motor housing
- EN-GJL-250
- Impeller
- EN-GJL-250
- Shaft
- Stainless steel
- Sealing on motor side
- Shaft seal ring
- Fluid sealing
- SIC/Al203
- Pump housing
- EN-GJL-250
- Motor housing
- EN-GJL-250
- Impeller
- EN-GJL-250
- Shaft
- Stainless steel
- Sealing on motor side
- Shaft seal ring
- Fluid sealing
- SIC/Al203
- Pump housing
- EN-GJL-250
- Motor housing
- EN-GJL-250
- Impeller
- EN-GJL-250
- Shaft
- Stainless steel
- Sealing on motor side
- Shaft seal ring
- Fluid sealing
- SIC/Al203
- Pump housing
- EN-GJL-250
- Motor housing
- EN-GJL-250
- Impeller
- EN-GJL-250
- Shaft
- Stainless steel
- Sealing on motor side
- Shaft seal ring
- Fluid sealing
- SIC/Al203
- Pump housing
- EN-GJL-250
- Motor housing
- EN-GJL-250
- Impeller
- EN-GJL-250
Electrical features
- Socket included
- Voltage (V)
- Frequency (Hz)
- Power consumption P1 (W)
- Power output P2 (W)
- Revolution per minute (RPM)
- Maximum current (A)
- IP rating
- Electrical class
- Motor insulation class
- Submerged
- Max. number of starts per hour
- Immersion depth (m)
- Current
- Number of pumps
- Length (m)
- Section (mm²)
- Type of cable
- Socket included
- Socket included
- Voltage (V)
- Voltage (V)
- Frequency (Hz)
- Frequency (Hz)
- Power consumption P1 (W)
- Power consumption P1 (W)
- Power output P2 (W)
- Power output P2 (W)
- Revolution per minute (RPM)
- Revolution per minute (RPM)
- Maximum current (A)
- Maximum current (A)
- IP rating
- IP rating
- Electrical class
- Electrical class
- Motor insulation class
- Motor insulation class
- Submerged
- Submerged
- Max. number of starts per hour
- Max. number of starts per hour
- Immersion depth (m)
- Immersion depth (m)
- Current
- Current
- Number of pumps
- Number of pumps
- Length (m)
- Length (m)
- Section (mm²)
- Section (mm²)
- Type of cable
- Type of cable
- Socket included
- no
- Voltage (V)
- 230
- Frequency (Hz)
- 50
- Power consumption P1 (W)
- 1000
- Power output P2 (W)
- 550
- Revolution per minute (RPM)
- 2800
- Maximum current (A)
- 18,2
- IP rating
- IP68
- Electrical class
- I
- Motor insulation class
- F
- Submerged
- S1
- Max. number of starts per hour
- 15
- Immersion depth (m)
- 10
- Current
- Single-phase
- Number of pumps
- 1
- Length (m)
- 10
- Section (mm²)
- 3x1
- Type of cable
- H07 RN8-F
- Socket included
- no
- Voltage (V)
- 230
- Frequency (Hz)
- 50
- Power consumption P1 (W)
- 1000
- Power output P2 (W)
- 550
- Revolution per minute (RPM)
- 2800
- Maximum current (A)
- 18,2
- IP rating
- IP68
- Electrical class
- I
- Motor insulation class
- F
- Submerged
- S1
- Max. number of starts per hour
- 15
- Immersion depth (m)
- 10
- Current
- Single-phase
- Number of pumps
- 1
- Length (m)
- 10
- Section (mm²)
- 3x1
- Type of cable
- H07 RN8-F
- Socket included
- no
- Voltage (V)
- 400
- Frequency (Hz)
- 50
- Power consumption P1 (W)
- 900
- Power output P2 (W)
- 550
- Revolution per minute (RPM)
- 2800
- Maximum current (A)
- 18,2
- IP rating
- IP68
- Electrical class
- I
- Motor insulation class
- F
- Submerged
- S1
- Max. number of starts per hour
- 15
- Immersion depth (m)
- 10
- Current
- Three-phase
- Number of pumps
- 1
- Length (m)
- 10
- Section (mm²)
- 4x1
- Type of cable
- H07 RN8-F
- Socket included
- no
- Voltage (V)
- 230
- Frequency (Hz)
- 50
- Power consumption P1 (W)
- 1250
- Power output P2 (W)
- 750
- Revolution per minute (RPM)
- 2800
- Maximum current (A)
- 18,2
- IP rating
- IP68
- Electrical class
- I
- Motor insulation class
- F
- Submerged
- S1
- Max. number of starts per hour
- 15
- Immersion depth (m)
- 10
- Current
- Single-phase
- Number of pumps
- 1
- Length (m)
- 10
- Section (mm²)
- 3x1
- Type of cable
- H07 RN8-F
- Socket included
- no
- Voltage (V)
- 230
- Frequency (Hz)
- 50
- Power consumption P1 (W)
- 1250
- Power output P2 (W)
- 750
- Revolution per minute (RPM)
- 2800
- Maximum current (A)
- 18,2
- IP rating
- IP68
- Electrical class
- I
- Motor insulation class
- F
- Submerged
- S1
- Max. number of starts per hour
- 15
- Immersion depth (m)
- 10
- Current
- Single-phase
- Number of pumps
- 1
- Length (m)
- 10
- Section (mm²)
- 3x1
- Type of cable
- H07 RN8-F
- Socket included
- no
- Voltage (V)
- 400
- Frequency (Hz)
- 50
- Power consumption P1 (W)
- 1100
- Power output P2 (W)
- 750
- Revolution per minute (RPM)
- 2800
- Maximum current (A)
- 18,2
- IP rating
- IP68
- Electrical class
- I
- Motor insulation class
- F
- Submerged
- S1
- Max. number of starts per hour
- 15
- Immersion depth (m)
- 10
- Current
- Three-phase
- Number of pumps
- 1
- Length (m)
- 10
- Section (mm²)
- 4x1
- Type of cable
- H07 RN8-F
- Socket included
- no
- Voltage (V)
- 230
- Frequency (Hz)
- 50
- Power consumption P1 (W)
- 1800
- Power output P2 (W)
- 1100
- Revolution per minute (RPM)
- 2800
- Maximum current (A)
- 18,2
- IP rating
- IP68
- Electrical class
- I
- Motor insulation class
- F
- Submerged
- S1
- Max. number of starts per hour
- 15
- Immersion depth (m)
- 10
- Current
- Single-phase
- Number of pumps
- 1
- Length (m)
- 10
- Section (mm²)
- 3x1
- Type of cable
- H07 RN8-F
- Socket included
- no
- Voltage (V)
- 230
- Frequency (Hz)
- 50
- Power consumption P1 (W)
- 1800
- Power output P2 (W)
- 1100
- Revolution per minute (RPM)
- 2800
- Maximum current (A)
- 18,2
- IP rating
- IP68
- Electrical class
- I
- Motor insulation class
- F
- Submerged
- S1
- Max. number of starts per hour
- 15
- Immersion depth (m)
- 10
- Current
- Single-phase
- Number of pumps
- 1
- Length (m)
- 10
- Section (mm²)
- 3x1
- Type of cable
- H07 RN8-F
- Socket included
- no
- Voltage (V)
- 400
- Frequency (Hz)
- 50
- Power consumption P1 (W)
- 1500
- Power output P2 (W)
- 1100
- Revolution per minute (RPM)
- 2800
- Maximum current (A)
- 18,2
- IP rating
- IP68
- Electrical class
- I
- Motor insulation class
- F
- Submerged
- S1
- Max. number of starts per hour
- 15
- Immersion depth (m)
- 10
- Current
- Three-phase
- Number of pumps
- 1
- Length (m)
- 10
- Section (mm²)
- 4x1
- Type of cable
- H07 RN8-F
- Socket included
- no
- Voltage (V)
- 230
- Frequency (Hz)
- 50
- Power consumption P1 (W)
- 1800
- Power output P2 (W)
- 1100
- Revolution per minute (RPM)
- 2800
- Maximum current (A)
- 18,2
- IP rating
- IP68
- Electrical class
- I
- Motor insulation class
- F
- Submerged
- S1
- Max. number of starts per hour
- 15
- Immersion depth (m)
- 10
- Current
- Single-phase
- Number of pumps
- 1
- Length (m)
- 10
- Section (mm²)
- 3x1
- Type of cable
- H07 RN8-F
- Socket included
- no
- Voltage (V)
- 230
- Frequency (Hz)
- 50
- Power consumption P1 (W)
- 1800
- Power output P2 (W)
- 1100
- Revolution per minute (RPM)
- 2800
- Maximum current (A)
- 18,2
- IP rating
- IP68
- Electrical class
- I
- Motor insulation class
- F
- Submerged
- S1
- Max. number of starts per hour
- 15
- Immersion depth (m)
- 10
- Current
- Single-phase
- Number of pumps
- 1
- Length (m)
- 10
- Section (mm²)
- 3x1
- Type of cable
- H07 RN8-F
- Socket included
- no
- Voltage (V)
- 400
- Frequency (Hz)
- 50
- Power consumption P1 (W)
- 2050
- Power output P2 (W)
- 1500
- Revolution per minute (RPM)
- 2800
- Maximum current (A)
- 18,2
- IP rating
- IP68
- Electrical class
- I
- Motor insulation class
- F
- Submerged
- S1
- Max. number of starts per hour
- 15
- Immersion depth (m)
- 10
- Current
- Three-phase
- Number of pumps
- 1
- Length (m)
- 10
- Section (mm²)
- 4x1
- Type of cable
- H07 RN8-F
Hydraulic
- Max. Head (m)
- Max. flow rate (m³/h)
- Discharge diameter DN
- ON Level (mm)
- OFF level (mm)
- Particle size (mm)
- Free passage (mm)
- Max. temperature of the pumped liquid (5 min) (° C)
- Type of impeller
- Type of activation
- Max. Head (m)
- Max. Head (m)
- Max. flow rate (m³/h)
- Max. flow rate (m³/h)
- Discharge diameter DN
- Discharge diameter DN
- ON Level (mm)
- ON Level (mm)
- OFF level (mm)
- OFF level (mm)
- Particle size (mm)
- Particle size (mm)
- Free passage (mm)
- Free passage (mm)
- Max. temperature of the pumped liquid (5 min) (° C)
- Max. temperature of the pumped liquid (5 min) (° C)
- Type of impeller
- Type of impeller
- Type of activation
- Type of activation
- Max. Head (m)
- 9
- Max. flow rate (m³/h)
- 20
- Discharge diameter DN
- 50
- ON Level (mm)
- -
- OFF level (mm)
- -
- Particle size (mm)
- 45
- Free passage (mm)
- 45
- Max. temperature of the pumped liquid (5 min) (° C)
- 40 °C
- Type of impeller
- vortex
- Type of activation
- -
- Max. Head (m)
- 9
- Max. flow rate (m³/h)
- 20
- Discharge diameter DN
- 50
- ON Level (mm)
- 25cm
- OFF level (mm)
- 16cm
- Particle size (mm)
- 45
- Free passage (mm)
- 45
- Max. temperature of the pumped liquid (5 min) (° C)
- 40 °C
- Type of impeller
- vortex
- Type of activation
- float
- Max. Head (m)
- 9
- Max. flow rate (m³/h)
- 20
- Discharge diameter DN
- 50
- ON Level (mm)
- -
- OFF level (mm)
- -
- Particle size (mm)
- 45
- Free passage (mm)
- 45
- Max. temperature of the pumped liquid (5 min) (° C)
- 40 °C
- Type of impeller
- vortex
- Type of activation
- -
- Max. Head (m)
- 12
- Max. flow rate (m³/h)
- 23
- Discharge diameter DN
- 50
- ON Level (mm)
- -
- OFF level (mm)
- -
- Particle size (mm)
- 45
- Free passage (mm)
- 45
- Max. temperature of the pumped liquid (5 min) (° C)
- 40 °C
- Type of impeller
- vortex
- Type of activation
- -
- Max. Head (m)
- 12
- Max. flow rate (m³/h)
- 23
- Discharge diameter DN
- 50
- ON Level (mm)
- 25cm
- OFF level (mm)
- 16cm
- Particle size (mm)
- 45
- Free passage (mm)
- 45
- Max. temperature of the pumped liquid (5 min) (° C)
- 40 °C
- Type of impeller
- vortex
- Type of activation
- float
- Max. Head (m)
- 12
- Max. flow rate (m³/h)
- 23
- Discharge diameter DN
- 50
- ON Level (mm)
- -
- OFF level (mm)
- -
- Particle size (mm)
- 45
- Free passage (mm)
- 45
- Max. temperature of the pumped liquid (5 min) (° C)
- 40 °C
- Type of impeller
- vortex
- Type of activation
- -
- Max. Head (m)
- 14
- Max. flow rate (m³/h)
- 25.5
- Discharge diameter DN
- 50
- ON Level (mm)
- -
- OFF level (mm)
- -
- Particle size (mm)
- 43
- Free passage (mm)
- 43
- Max. temperature of the pumped liquid (5 min) (° C)
- 40 °C
- Type of impeller
- vortex
- Type of activation
- -
- Max. Head (m)
- 14
- Max. flow rate (m³/h)
- 25.5
- Discharge diameter DN
- 50
- ON Level (mm)
- 25cm
- OFF level (mm)
- 16cm
- Particle size (mm)
- 43
- Free passage (mm)
- 43
- Max. temperature of the pumped liquid (5 min) (° C)
- 40 °C
- Type of impeller
- vortex
- Type of activation
- float
- Max. Head (m)
- 14
- Max. flow rate (m³/h)
- 25.5
- Discharge diameter DN
- 50
- ON Level (mm)
- -
- OFF level (mm)
- -
- Particle size (mm)
- 43
- Free passage (mm)
- 43
- Max. temperature of the pumped liquid (5 min) (° C)
- 40 °C
- Type of impeller
- vortex
- Type of activation
- -
- Max. Head (m)
- 16
- Max. flow rate (m³/h)
- 29
- Discharge diameter DN
- 50
- ON Level (mm)
- -
- OFF level (mm)
- -
- Particle size (mm)
- 41
- Free passage (mm)
- 41
- Max. temperature of the pumped liquid (5 min) (° C)
- 40 °C
- Type of impeller
- vortex
- Type of activation
- -
- Max. Head (m)
- 16
- Max. flow rate (m³/h)
- 29
- Discharge diameter DN
- 50
- ON Level (mm)
- 25cm
- OFF level (mm)
- 16cm
- Particle size (mm)
- 41
- Free passage (mm)
- 41
- Max. temperature of the pumped liquid (5 min) (° C)
- 40 °C
- Type of impeller
- vortex
- Type of activation
- float
- Max. Head (m)
- 16
- Max. flow rate (m³/h)
- 29
- Discharge diameter DN
- 50
- ON Level (mm)
- -
- OFF level (mm)
- -
- Particle size (mm)
- 41
- Free passage (mm)
- 41
- Max. temperature of the pumped liquid (5 min) (° C)
- 40 °C
- Type of impeller
- vortex
- Type of activation
- -
Logistics
- Gross weight (kg)
- Gross weight (kg)
- Gross weight (kg)
- Gross weight (kg)
- 23
- Gross weight (kg)
- 23
- Gross weight (kg)
- 22
- Gross weight (kg)
- 23
- Gross weight (kg)
- 23
- Gross weight (kg)
- 23
- Gross weight (kg)
- 23
- Gross weight (kg)
- 23
- Gross weight (kg)
- 23
- Gross weight (kg)
- 23
- Gross weight (kg)
- 23
- Gross weight (kg)
- 23
General description
- EAN code
- EAN code
- EAN code
- EAN code
- 3308815090139
- EAN code
- 3308815090146
- EAN code
- 3308815090153
- EAN code
- 3308815090160
- EAN code
- 3308815090177
- EAN code
- 3308815090184
- EAN code
- 3308815090191
- EAN code
- 3308815090207
- EAN code
- 3308815090214
- EAN code
- 3308815090221
- EAN code
- 3308815090238
- EAN code
- 3308815090245
Quality
Buy with confidence
Made in France
Many products have received the Made in France label.
Performance and Reliability
Technologies and materials that ensure efficiency and longevity.
Warranty
Up to 2 years warranty.
Extensive support
A network of repair technicians.
Experts Since 1958
Creator of the Sanibroyeur macerating toilet.