Sanipump VX 65-80

Name: Sanipump VX 65-80
Brand: SFA

The Sanipump VX 65/80 are cast iron submersible pumps designed for the removal of black water and rainwater up to a maximum height of 35 m.

Vortex impeller
Outlet in DN 65, 80 or 100
Lifting of waste water and rainwater
Service class S1 (if motor is fully submerged)
Double mechanical seal
Stationary installation on a base
Free passage up to 80 mm
Compatible with the Sanifos FRP

Technical specification

Sanipump VX 65-80

Version

Version
Version

Version
Sanipump VX 65-170/120.24

Version
Sanipump VX 65-170/140.24

Version
Sanipump VX 65-170/160.40

Version
Sanipump VX 65-170/190.73

Version
Sanipump VX 80-220/160.40

Version
Sanipump VX 80-220/170.49

Version
Sanipump VX 80-220/190.73

Materials

Shaft
Sealing on motor side
Fluid sealing
Pump housing
Motor housing
Impeller

Shaft
Shaft
Sealing on motor side
Sealing on motor side
Fluid sealing
Fluid sealing
Pump housing
Pump housing
Motor housing
Motor housing
Impeller
Impeller

Shaft
1.4021
Sealing on motor side
SIC/SIC/NBR
Fluid sealing
Carbon/Al203
Pump housing
EN-GJL-250
Motor housing
EN-GJL-250
Impeller
EN-GJL-250

Shaft
1.4021
Sealing on motor side
SIC/SIC/NBR
Fluid sealing
Carbon/Al203
Pump housing
EN-GJL-250
Motor housing
EN-GJL-250
Impeller
EN-GJL-250

Shaft
1.4021
Sealing on motor side
SIC/SIC/NBR
Fluid sealing
Carbon/Al203
Pump housing
EN-GJL-250
Motor housing
EN-GJL-250
Impeller
EN-GJL-250

Shaft
1.4021
Sealing on motor side
SIC/SIC/NBR
Fluid sealing
Carbon/Al203
Pump housing
EN-GJL-250
Motor housing
EN-GJL-250
Impeller
EN-GJL-250

Shaft
1.4021
Sealing on motor side
SIC/SIC/NBR
Fluid sealing
Carbon/Al203
Pump housing
EN-GJL-250
Motor housing
EN-GJL-250
Impeller
EN-GJL-250

Shaft
1.4021
Sealing on motor side
SIC/SIC/NBR
Fluid sealing
Carbon/Al203
Pump housing
EN-GJL-250
Motor housing
EN-GJL-250
Impeller
EN-GJL-250

Shaft
1.4021
Sealing on motor side
SIC/SIC/NBR
Fluid sealing
Carbon/Al203
Pump housing
EN-GJL-250
Motor housing
EN-GJL-250
Impeller
EN-GJL-250

Electrical features

Socket included
Voltage (V)
Frequency (Hz)
Power consumption P1 (W)
Power output P2 (W)
Revolution per minute (RPM)
Maximum current (A)
IP rating
Electrical class
Motor insulation class
Mode of operation
Submerged
Max. number of starts per hour
Immersion depth (m)
Current
Length (m)
Section (mm²)
Type of cable

Socket included
Socket included
Voltage (V)
Voltage (V)
Frequency (Hz)
Frequency (Hz)
Power consumption P1 (W)
Power consumption P1 (W)
Power output P2 (W)
Power output P2 (W)
Revolution per minute (RPM)
Revolution per minute (RPM)
Maximum current (A)
Maximum current (A)
IP rating
IP rating
Electrical class
Electrical class
Motor insulation class
Motor insulation class
Mode of operation
Mode of operation
Submerged
Submerged
Max. number of starts per hour
Max. number of starts per hour
Immersion depth (m)
Immersion depth (m)
Current
Current
Length (m)
Length (m)
Section (mm²)
Section (mm²)
Type of cable
Type of cable

Socket included
No
Voltage (V)
400
Frequency (Hz)
50
Power consumption P1 (W)
2950
Power output P2 (W)
2400
Revolution per minute (RPM)
2900
Maximum current (A)
45
IP rating
IP68
Electrical class
I
Motor insulation class
F
Mode of operation
S3 25 %
Submerged
S1
Max. number of starts per hour
30
Immersion depth (m)
25
Current
Three-phase
Length (m)
10
Section (mm²)
4x1
Type of cable
H07 RN8-F

Socket included
No
Voltage (V)
400
Frequency (Hz)
50
Power consumption P1 (W)
2950
Power output P2 (W)
2400
Revolution per minute (RPM)
2900
Maximum current (A)
45
IP rating
IP68
Electrical class
I
Motor insulation class
F
Mode of operation
S3 25 %
Submerged
S1
Max. number of starts per hour
30
Immersion depth (m)
25
Current
Three-phase
Length (m)
10
Section (mm²)
4x1
Type of cable
H07 RN8-F

Socket included
No
Voltage (V)
400
Frequency (Hz)
50
Power consumption P1 (W)
4860
Power output P2 (W)
4000
Revolution per minute (RPM)
2900
Maximum current (A)
76
IP rating
IP68
Electrical class
I
Motor insulation class
F
Mode of operation
S3 25 %
Submerged
S1
Max. number of starts per hour
30
Immersion depth (m)
25
Current
Three-phase
Length (m)
10
Section (mm²)
4x1
Type of cable
H07 RN8-F

Socket included
No
Voltage (V)
400
Frequency (Hz)
50
Power consumption P1 (W)
5830
Power output P2 (W)
4900
Revolution per minute (RPM)
2900
Maximum current (A)
86
IP rating
IP68
Electrical class
I
Motor insulation class
F
Mode of operation
S3 25 %
Submerged
S1
Max. number of starts per hour
30
Immersion depth (m)
25
Current
Three-phase
Length (m)
10
Section (mm²)
4x1
Type of cable
H07 RN8-F

Socket included
No
Voltage (V)
400
Frequency (Hz)
50
Power consumption P1 (W)
5830
Power output P2 (W)
4900
Revolution per minute (RPM)
2900
Maximum current (A)
76
IP rating
IP68
Electrical class
I
Motor insulation class
F
Mode of operation
S3 25 %
Submerged
S1
Max. number of starts per hour
30
Immersion depth (m)
25
Current
Three-phase
Length (m)
10
Section (mm²)
4x1
Type of cable
H07 RN8-F

Socket included
No
Voltage (V)
400
Frequency (Hz)
50
Power consumption P1 (W)
5830
Power output P2 (W)
4900
Revolution per minute (RPM)
2900
Maximum current (A)
86
IP rating
IP68
Electrical class
I
Motor insulation class
F
Mode of operation
S3 25 %
Submerged
S1
Max. number of starts per hour
30
Immersion depth (m)
25
Current
Three-phase
Length (m)
10
Section (mm²)
4x1
Type of cable
H07 RN8-F

Socket included
No
Voltage (V)
400
Frequency (Hz)
50
Power consumption P1 (W)
8720
Power output P2 (W)
7300
Revolution per minute (RPM)
2900
Maximum current (A)
125
IP rating
IP68
Electrical class
I
Motor insulation class
F
Mode of operation
S3 25 %
Submerged
S1
Max. number of starts per hour
30
Immersion depth (m)
25
Current
Three-phase
Length (m)
10
Section (mm²)
4x1
Type of cable
H07 RN8-F

Hydraulic

Max. Head. (m)
Max. flow rate. (m³/h)
Discharge diameter DN
Free passage (mm)
Max. temperature of the pumped liquid (5 min) (° C)
Type of impeller

Max. Head. (m)
Max. Head. (m)
Max. flow rate. (m³/h)
Max. flow rate. (m³/h)
Discharge diameter DN
Discharge diameter DN
Free passage (mm)
Free passage (mm)
Max. temperature of the pumped liquid (5 min) (° C)
Max. temperature of the pumped liquid (5 min) (° C)
Type of impeller
Type of impeller

Max. Head. (m)
15
Max. flow rate. (m³/h)
44
Discharge diameter DN
65
Free passage (mm)
65
Max. temperature of the pumped liquid (5 min) (° C)
40 °C
Type of impeller
vortex

Max. Head. (m)
20
Max. flow rate. (m³/h)
56
Discharge diameter DN
65
Free passage (mm)
65
Max. temperature of the pumped liquid (5 min) (° C)
40 °C
Type of impeller
vortex

Max. Head. (m)
26
Max. flow rate. (m³/h)
76
Discharge diameter DN
65
Free passage (mm)
65
Max. temperature of the pumped liquid (5 min) (° C)
40 °C
Type of impeller
vortex

Max. Head. (m)
35
Max. flow rate. (m³/h)
96
Discharge diameter DN
65
Free passage (mm)
65
Max. temperature of the pumped liquid (5 min) (° C)
40 °C
Type of impeller
vortex

Max. Head. (m)
21
Max. flow rate. (m³/h)
80
Discharge diameter DN
80
Free passage (mm)
80
Max. temperature of the pumped liquid (5 min) (° C)
40 °C
Type of impeller
vortex

Max. Head. (m)
24
Max. flow rate. (m³/h)
95
Discharge diameter DN
80
Free passage (mm)
80
Max. temperature of the pumped liquid (5 min) (° C)
40 °C
Type of impeller
vortex

Max. Head. (m)
30
Max. flow rate. (m³/h)
110
Discharge diameter DN
80
Free passage (mm)
80
Max. temperature of the pumped liquid (5 min) (° C)
40 °C
Type of impeller
vortex

Logistics

Gross weight (kg)

Gross weight (kg)
Gross weight (kg)

Gross weight (kg)
65

Gross weight (kg)
65

Gross weight (kg)
69

Gross weight (kg)
91

Gross weight (kg)
73

Gross weight (kg)
91

Gross weight (kg)
96

General description

EAN code

EAN code
EAN code

EAN code
3308815090252

EAN code
3308815090269

EAN code
3308815090276

EAN code
3308815090283

EAN code
3308815090290

EAN code
3308815090306

EAN code
3308815090313

FAQs

Frequently Asked Questions

The Sanipump VX 65/80 is a cast-iron submersible lifting pump designed to pump wastewater and rainwater to a maximum lifting height of 35 m. It is designed to be installed in a manhole, a pit, or a custom lifting station.
The Vortex impeller of the Sanipump VX 65/80 reduces the risk of clogging and enables a high flow rate.
Seven three-phase versions of the Sanipump VX 65/80 are available, with different performance levels depending on the model: Sanipump VX 65-170/120.24 Sanipump VX 65-170/140.24 Sanipump VX 65-170/160.40 Sanipump VX 65-170/190.73 Sanipump VX 80-220/160.40 Sanipump VX 80-220/170.49 Sanipump VX 80-220/190.73

The electrical characteristics of the Sanipump VX 65/80 vary depending on the version. However, some common specifications include a voltage of 400 V, a three-phase power supply, and an H07 RN8-F cable with a cross-section of 4 × 1 mm². The P1 input power and P2 output power values vary depending on the version.
Yes, the Sanipump VX 65/80 is compatible with the Sanifos FRP.
The Sanipump VX 65/80 has a maximum total dynamic head of 35 m, a maximum flow rate of 110 m³/h, and a DN 65 or DN 80 discharge diameter, depending on the model.

The Sanipump VX 65/80 is a cast-iron submersible lifting pump designed to pump wastewater and rainwater to a maximum lifting height of 35 m. It is designed to be installed in a manhole, a pit, or a custom lifting station.
The electrical characteristics of the Sanipump VX 65/80 vary depending on the version. However, some common specifications include a voltage of 400 V, a three-phase power supply, and an H07 RN8-F cable with a cross-section of 4 × 1 mm². The P1 input power and P2 output power values vary depending on the version.
The Vortex impeller of the Sanipump VX 65/80 reduces the risk of clogging and enables a high flow rate.
Yes, the Sanipump VX 65/80 is compatible with the Sanifos FRP.
Seven three-phase versions of the Sanipump VX 65/80 are available, with different performance levels depending on the model: Sanipump VX 65-170/120.24 Sanipump VX 65-170/140.24 Sanipump VX 65-170/160.40 Sanipump VX 65-170/190.73 Sanipump VX 80-220/160.40 Sanipump VX 80-220/170.49 Sanipump VX 80-220/190.73
The Sanipump VX 65/80 has a maximum total dynamic head of 35 m, a maximum flow rate of 110 m³/h, and a DN 65 or DN 80 discharge diameter, depending on the model.

Quality

Buy with confidence

Made in France
Many products have received the Made in France label.
Performance and Reliability
Technologies and materials that ensure efficiency and longevity.
Warranty
Up to 2 years warranty.
Extensive support
A network of repair technicians.
Experts Since 1958
Creator of the Sanibroyeur macerating toilet.

Sanipump VX 65-80

Sanipump VX 65-80

Materials

Electrical features

Hydraulic

Logistics

General description

Frequently Asked Questions

Buy with confidence

Made in France

Performance and Reliability

Warranty

Extensive support

Experts Since 1958