Sanipump ZPG 71
Can be installed in an existing manhole or pit
Exists in 4 versions
Product details
Sanipump ZPG 71
Materials
Electrical features
Hydraulic
Logistics
General description
Frequently Asked Questions
The Sanipump ZPG 71 is a cast-iron submersible pump designed for pumping wastewater, drainage water, and rainwater. It can be installed in a lifting station, a manhole, or a pit. It is not suitable for removing blackwater, such as toilet waste.
The Sanipump ZPG 71 features an integrated pump base, a lifting height of up to 31 m, a 40 mm free passage, and is compatible with the Sanifos 1200, 1600, 2100, 3100, and FRP systems. It has an S1 operating mode when submerged, which prevents overheating and allows continuous operation.
The materials used to manufacture the Sanipump ZPG 71 are: stainless steel shaft; motor-side seal made of SIC/SIC/NBR; fluid-side seal made of SIC/SIC/NBR; pump housing made of EN-GJL-200; base made of EN-GJL-200; motor housing made of EN-GJL-200; and impeller made of EN-GJL-200.
The Sanipump ZPG 71 has a maximum lifting height of 31 metres, a DN 50 discharge connection, and a maximum flow rate of 43 m³/h.
The Sanipump ZPG 71 is available in four versions: one single-phase version, the Sanipump ZPG 71.1 S, and three three-phase versions, the Sanipump ZPG 71.1 T, Sanipump ZPG 71.2 T, and Sanipump ZPG 71.3 T, each offering different performance levels.
All the accessories required for floor installation or installation on a mounting base are available.
The Sanipump ZPG 71 is a cast-iron submersible pump designed for pumping wastewater, drainage water, and rainwater. It can be installed in a lifting station, a manhole, or a pit. It is not suitable for removing blackwater, such as toilet waste.
The Sanipump ZPG 71 has a maximum lifting height of 31 metres, a DN 50 discharge connection, and a maximum flow rate of 43 m³/h.
The Sanipump ZPG 71 features an integrated pump base, a lifting height of up to 31 m, a 40 mm free passage, and is compatible with the Sanifos 1200, 1600, 2100, 3100, and FRP systems. It has an S1 operating mode when submerged, which prevents overheating and allows continuous operation.
The Sanipump ZPG 71 is available in four versions: one single-phase version, the Sanipump ZPG 71.1 S, and three three-phase versions, the Sanipump ZPG 71.1 T, Sanipump ZPG 71.2 T, and Sanipump ZPG 71.3 T, each offering different performance levels.
The materials used to manufacture the Sanipump ZPG 71 are: stainless steel shaft; motor-side seal made of SIC/SIC/NBR; fluid-side seal made of SIC/SIC/NBR; pump housing made of EN-GJL-200; base made of EN-GJL-200; motor housing made of EN-GJL-200; and impeller made of EN-GJL-200.
All the accessories required for floor installation or installation on a mounting base are available.
Buy with confidence
Made in France
Many products have received the Made in France label.
Performance and Reliability
Technologies and materials that ensure efficiency and longevity.
Warranty
Up to 2 years warranty.
Extensive support
A network of repair technicians.
Experts Since 1958
Creator of the Sanibroyeur macerating toilet.